What are some examples of chemical formulae?

Glucose has the molecular formula C6H12O6 and the empirical formula CH2O.Water has the molecular and empirical formula H2O. Copper(II) sulfate has the molecular formula and the empirical formula CuSO4.

What are the rules for writing a chemical formula?

Elements are shown using their chemical symbol.In ionic species, the sum of the charges of the ions must equal zero.Multiple copies of an atom or ion are shown in subscript. If there are multiple copies of a polyatomic ion, the ion is enclosed in brackets.In ionic compounds, the name of the cation is written first.

How do you write chemical formulas in text?

You write chemical formulae using the chemical symbols of the elements involved and numbers to show their relative amounts or ratio. Follow these rules:In ionic species, the sum of the charges of the ions must equal zero.Multiple copies of an atom or ion are shown in subscript. If there are multiple copies of a polyatomic ion, the ion is enclosed in brackets.In ionic compounds, the name of the cation is written first.

Writing Chemical Formulae

Chemical Analysis

Chemical Reactions

Chemistry Branches

History of Chemistry

Inorganic Chemistry

Ionic and Molecular Compounds

Kinetics

Making Measurements

Nuclear Chemistry

Organic Chemistry

Physical Chemistry

The Earths Atmosphere

TABLE OF CONTENTS :

TABLE OF CONTENTS

Lerne mit deinen Freunden und bleibe auf dem richtigen Kurs mit deinen persönlichen Lernstatistiken

Jetzt kostenlos anmelden

Nie wieder prokastinieren mit unseren Lernerinnerungen.

Jetzt kostenlos anmelden

In 1997, Nathan Zohner, a ninth-grade student at Eagle Rock Junior High School in Idaho Falls, USA conducted a science fair project on the harmful effects of DHMO (Dihydrogen monoxide). He distributed his report to his classmates and sought their signatures to ban this chemical claiming that DHMO is present in tumour cells of cancer patients, causes severe burns in the vapour state, and kills when accidentally ingested.

Horrified by this knowledge, over 86% of his classmates signed the petition to ban it, little did they know that Dihydrogen monoxide is nothing but water.^[1] Yes, it will kill you when you drown, its steam causes severe burns, and tumour cells have higher water content than normal cells. All these were not made up, they are facts. The prank was successful because people didn’t think of writing its chemical formula from the name dihydrogen monoxide, H₂O. Had they taken the time to write the formula, they wouldn’t have fallen into Nathan’s trap. Nathan's project named "How gullible are we?" won a prize in the competition.

Therefore, if we don't want to be victims of such pranks, we should know how to write chemical formulae. Come, let's dive deep!

Chemical formula definition

A chemical formula is a set of chemical symbols showing the number or ratio of atoms of each type of element in a molecule or compound.

From the above story, how can you write the chemical formula of water from its chemical name, dihydrogen monoxide?

'Di' means 2 and 'mono' means 1. Therefore, dihydrogen indicates that there are two hydrogen atoms and monoxide indicates the presence of one oxygen atom. Thus, the chemical formula of water is H₂O. Of course, this trick is not possible with all the chemical formulae, but don't worry, we will make it easy for you!

Types of chemical formulae

There are several ways to write the chemical formula that represents a molecule or a compound. The different types of chemical formulae include:

Molecular formula
Empirical formula
Displayed formula

Molecular formula

The molecular formula of a compound shows the number of atoms of each type in a compound or molecule.

For example, the molecular formula of glucose is C₆H₁₂O₆. This formula gives us the information that there are six carbon atoms (C₆) , twelve hydrogen atoms (H₁₂) and six oxygen atoms(O₆) in a molecule of glucose.

Empirical formula

The empirical formula of a compound shows the simplest whole-number ratio of the atoms of each element present in a compound or molecule.

For example, the empirical formula of glucose is CH₂O.

This formula shows that the number of hydrogen atoms in glucose is exactly twice the number of both carbon and oxygen atoms. In other words, the ratio of C:H:O atoms in glucose is 1:2:1.

We always use empirical formulae to represent ionic compounds. This is because ionic compounds can be infinite, and so they don't have a fixed molecular formula.

Displayed formula

The displayed formula of a compound shows every atom and bond within a molecule. Each bond in a displayed formula represents a pair of electrons.

Glucose and fructose have the same molecular formula: C₆H₁₂O₆. You can already see that they also have the same empirical formula: CH₂O. Then, how do we differentiate between the two? Let us look at their displayed formula.

You'll learn more about functional groups in Organic Chemistry. You'll also recap chemical formulae in Organic Compounds.

Rules for writing chemical formulae

Learning how to write chemical formulae is the heart of chemistry. Writing formulae helps you in many aspects of chemistry-like writing balanced chemical equations, and determining masses of compounds and molecules. In short, everything hereafter you learn depends on knowing the symbols of elements and using them to write the correct chemical formulae.

Two important aspects one must bear in mind while writing chemical formulae:

Ionic compounds don't exist as molecules; hence, they don't have a molecular formula. Ionic compounds exist as giant lattices, they have ionic formula units represented by empirical formulae (Eg: NaCl).

Covalent compounds exist as molecules; hence, they are represented by molecular formulae.

There are some rules that should be followed when writing chemical formulae.

Elements are shown using their chemical symbol.
The charges of the ions should be predicted based on their position in the periodic table

Periodic table of elements, Vaia Fig. 2. Periodic table of elements with charges of ions written at the top of groups(columns).

In ionic species, the sum of the charges of the ions must equal zero.
In covalent species, the partial charges of the elements must be balanced.
The number of atoms of each element or ion in the formula is written to the right of its symbol in subscript.
- If a compound contains more than one polyatomic ion, each ion is enclosed in brackets, with the subscript written to the right of the closing bracket (ex- Cu(SO₄)₂)
- When the ratio of a polyatomic ion is only 1, brackets are not required (e.g: NaOH, NH₄NO₃.)
In ionic species, the name of the cation is always written first. This means that if the compound consists of a metal and a non-metal, the symbol of the metal must be written first, followed by the symbol of the non-metal.
Transition metals can exhibit two or more different charges and can form different compounds with the same non-metal. For example, copper can form two compounds with chlorine-cuprous chloride(CuCl) and cupric chloride (CuCl₂). In cuprous chloride, the charge of copper is +1 which is represented as a Roman numeral enclosed in parentheses after the corresponding metal ion, copper in this case-Copper (I) chloride. Similarly, cupric chloride is written as Copper(II) Chloride.

Given below is a list of the most common polyatomic ions that you will encounter very often.

Name of the polyatomic ion	Symbol	Example
Nitrate	\(NO^{-}_3\)	Sodium nitrate- \(NaNO_3\)
Nitrite	\(NO_2^-\)	Sodium nitrite- \(NaNO_2\)
Carbonate	\(CO_3^-2\)	Sodium carbonate-Washing soda \(Na_2CO_3\)
Sulfate	\(SO^{-2}_4\)	Sodium sulfate- \(Na_2SO_4\)
Sulfite	\(SO^{-2}_3\)	Sodium sulfite- \(Na_2SO_3\)
Phosphate	\(PO^{-3}_4\)	Sodium phosphate- \(Na_3PO_4\)
Phosphite	\(PO^{-3}_3\)	Trisodium phosphite\(Na_3PO_3\)
Phosphide	\(P^{-3}\)	Sodium phosphide- \(Na_3P\)
Hydroxide	\(OH^-\)	Sodium hydroxide- \(NaOH\)
Ammonium	\(NH_4^+\)	Ammonium chloride- \(NH_4Cl\)
Bicarbonate/Hydrogen carbonate	\(HCO^{-}_3\)	Sodium bicarbonate- Baking soda- \(NaHCO_3\)
Bisulfate/ Hydrogen sulfate	\(HSO^{-}_4\)	Sodium hydrogen sulfate- \(NaHSO_4\)
Bisulfite/ Hydrogen sulfite	\(HSO_3\)	Sodium hydrogen sulfite- \(NaHSO_3\)
Sulfide	\(S^{-2}\)	Sodim sulfide- \(Na_2S\)
Permanganate	\(MnO_4^-\)	Potassium permanganate \(KMnO_4\)

Steps in writing chemical formulae

Let us understand how to write a chemical formula by taking the example of copper (II) chloride. Refer to the rules for writing chemical formulae to recall that copper can form two different compounds with chlorine.

First, identify the elements or ions that are present in the compound for which you are trying to write the formula. Let us take the example of a simple compound - copper (II) chloride. We can identify that there is copper, and there is chlorine in this compound.
Then, write down the chemical symbols of the elements/ions that you identified in the first step. If the compound is made of a metal and a non-metal, write the symbol of the metal first.
Fig. 3. Identifying elements in a compound: copper and chlorine.

After writing the chemical symbols of all elements/ions in the compound, write the charges of ions right below the respective ions. In this case, +2 below copper and -1 beneath chlorine.
Fig. 4. Writing the valencies of each element: copper and chlorine.
Now, cross over the valencies of each element with the other element/ion.
Fig. 5. Crossing the Valencies of copper and chlorine.
Finally, the charge of one ion becomes the ratio/subscript of the other element/ion. Remember to write the ratio in subscript.

Writing Chemical Formula

Fig. 6. Writing chemical formulae: copper and chlorine.

Can you guess if CuCl₂ is the molecular formula or the empirical formula of copper chloride? Yes, you guessed it right! Copper (II) chloride is an ionic compound. Therefore, CuCl₂ is the empirical formula of the cupric chloride.

Molecular formulae and empirical formulae can also be found if the relative atomic mass or the percentage composition of the compound is known.

Examples of writing chemical formulae: molecules, ions, and compounds

Let us look at some examples to practice writing chemical formulae.

Water

The chemical name for water is dihydrogen monoxide. Looking at the chemical name, we can identify that there is hydrogen and oxygen in it (oxide is the name for oxygen ion, O^2-).

We know that the valency of hydrogen is 1, and that of oxygen is 2. Following the steps for writing the chemical formula, we can write this:

writing the chemical formula of water, studysmarter Fig. 7. Crossing the valencies for water.

Therefore, the chemical formula of water (dihydrogen monoxide) is H₂O. This is the molecular formula of H₂O, as well as its empirical formula. Let us look at its displayed formula -

Structure of water molecule, studysmarter Fig. 8. Displayed formula for water.

Carbon tetrachloride

From the name, we can deduce that this compound has carbon, and chlorine in it. The prefix tetra- is for 4. That means there are 4 chlorine atoms in the molecule of this compound. Can you already guess the chemical formula? Let's follow the steps to reach the formula.

Fig. 9. Chemical formula of carbon tetrachloride.

If you guessed CCl₄ as the chemical formula (and the empirical formula too) for carbon tetrachloride, you were right! Now, for the displayed formula-

Fig. 10. Displayed formula of carbon tetrachloride.

Copper(II) Sulphate

Copper(II) sulphate is a salt i.e. it is made when a base of copper and acid of sulphate neutralise each other. It is solid at room temperature. Let us find out the formula of copper(II) sulphate through the steps.

Chemical Formula of Copper Sulphate Fig. 11. Chemical formula of copper (II) sulfate.

Copper has a charge of +2, and the charge of sulfate ion is also -2, so the charges balance each other. Therefore, the molecular formula of copper sulphate is CuSO₄ (and not Cu₂(SO₄)₂.)

You might sometimes see copper sulfate written as CuSO₄.5H₂O. This is the hydrated form of the salt.

Hydrated salt means there is water of crystallisation in the solid crystals of salt.

Water of crystallisation is the water present in hydrated salts. Water molecules inside the salt crystals are linked to the metal ions either by dative bonds^{[2] [3]} or by ion-dipole interactions.^[4^]

A salt that contains no water of crystallisation is called anhydrous salt.

In a hydrated salt, the number of moles of water that is linked into one mole of the salt is known as the degree of hydration. In the example of CuSO₄.5H₂O, the degree of hydration is 5.

Ammonium nitrate

Ammonium nitrate is an ionic compound. The cation is the ammonium (NH₄⁺), and the anion is the nitrate (NO₃^-). Have you already found the chemical formula for this compound? Let us go over the steps again

Fig. 12. Chemical formula of ammonium nitrate.

So, the chemical formula for ammonium nitrate is NH₄NO₃. Did you guess it right? Since there are 2 nitrogen atoms (one in cation, one in anion), the molecular formula can also be written as H₄N₂O₃.

Let us draw the displayed formula now:

Fig. 13. Displayed formula for ammonium nitrate.

Examples of Writing Chemical Formulae

Now let us look at a few more example problems, where the name and chemical formula of the compound is unknown. The charges of the ions/elements will be given. You should be able to derive the chemical formula from the given information.

An element X with charge 3 forms a compound with Oxygen. What is the molecular formula of that compound?

Solution

We know that oxygen has a charge of -2 (oxide ion= -2 charge). Let us follow the steps to arrive at the formula. Remember that oxygen will form the anion, so element X has to form the cation. Therefore, element X will be written first.

Oxide of Element X Fig. 14. Oxide of a hypothetical element X.

Therefore, the molecular formula of this compound is X₂O₃. It should be noted that the empirical formula of this compound will be the same as its molecular formula.

The element Y forms its sulphide. The charge of element Y is 2. What will be the formula of the sulphide of Y?

Solution

Sulphide is the name for the sulphur anion, S^2-. Let us follow the steps to arrive at the formula.

Sulphide of Element Y Fig. 15. Sulphide of a hypothetical element Y.

Same as we saw in copper (II) sulfate, the charges of Y and S balance each other. Therefore, the molecular formula for this compound is YS.

Writing Formulae - Key takeaways

A chemical formula is a set of chemical symbols showing the number of atoms of each type of element in a molecule or compound.
There are multiple types of chemical formulae:
- The molecular formula shows the number of atoms of each element in a compound or molecule.
- The empirical formula shows the simplest whole-number ratio of the atoms of each element present in a compound or molecule.
- The displayed formula show every atom and bond within a molecule.
Certain rules must be followed while writing chemical formulae:
- Elements are shown using their chemical symbol.
- In ionic species, the sum of the charges of the ions must equal zero.
- Multiple copies of an atom or ion are shown in subscript.
- In ionic compounds, the name of the cation is written first.
We can work out the formula and charges of ions using the positions of the elements on the periodic table.

References

https://www.washingtonpost.com/archive/opinions/1997/10/21/dihydrogen-monoxide-unrecognized-killer/ee85631a-c426-42c4-bda7-ed63db993106/
https://www.bbc.co.uk/bitesize/guides/zrx32sg/revision/10#:~:text=Water%20of%20crystallisation%20is%20water,main%20formula%20by%20a%20dot.&text=hydrated%20means%20that%20the%20solid%20crystals%20contain%20water%20of%20crystallisation
https://www.sciencedirect.com/topics/engineering/hydrated-salt
Shiver and Atkin's Inorganic chemistry, Fifth edition

Frequently Asked Questions about Writing Chemical Formulae

A chemical formula is a set of chemical symbols showing the number or ratio of atoms of each type of element in a molecule or compound. It can also indicate the species' structure or which ions it contains, and help calculate its relative molecular mass.

Glucose has the molecular formula C₆H₁₂O₆and the empirical formula CH₂O.
Water has the molecular and empirical formula H₂O.
Copper(II) sulfate has the molecular formula and the empirical formula CuSO₄.

A chemical formula is a set of chemical symbols showing the number or ratio of atoms of each type of element in a molecule or compound.

Elements are shown using their chemical symbol.
In ionic species, the sum of the charges of the ions must equal zero.
Multiple copies of an atom or ion are shown in subscript. If there are multiple copies of a polyatomic ion, the ion is enclosed in brackets.
In ionic compounds, the name of the cation is written first.

You write chemical formulae using the chemical symbols of the elements involved and numbers to show their relative amounts or ratio. Follow these rules:

In ionic species, the sum of the charges of the ions must equal zero.
Multiple copies of an atom or ion are shown in subscript. If there are multiple copies of a polyatomic ion, the ion is enclosed in brackets.
In ionic compounds, the name of the cation is written first.

Final Writing Chemical Formulae Quiz

Writing Chemical Formulae Quiz - Teste dein Wissen

Question

What is the empirical formula?

Show answer

Answer

The empirical formula shows the simplest whole-number molar ratio of each element in a compound.

Show question

Question

What is molecular formula?

Show answer

Answer

The molecular formula shows the actual number of atoms of each element in a molecule.

Show question

Question

Why are the molecular and empirical formulas sometimes identical?

Show answer

Answer

Sometimes the empirical and molecular formulas are identical because the ratio of atoms in a species cannot be simplified further.

Show question

Question

Which of these do you need to find the empirical formula of a substance?

Show answer

Answer

Relative atomic mass

Show question

Question

Which of these do you need to find the molecular formula of a substance?

Show answer

Answer

Relative formula mass

Show question

Question

A hydrocarbon has a mass that is 83.7 percent carbon and a relative atomic mass of 86.

Find the empirical formula and then the molecular formula.

Show answer

Answer

100 - 83.7 = 16.3

83.7 ÷ 12 = 6.975

16.3 ÷ 1 = 16.3

6.975 ÷ 6.975 = 1

16.3 ÷ 6.975 = 2.337

*find ratio to the nearest whole number

2.337 x 3 = 7.011

Empirical formula = C3H7

Arof empirical formula

(C 12 x 3) + (H 1 x 7) = 43

86 ÷ 43 = 2

Molecular formula:

C(3x2)H(7x2)

C6H14

Show question

Question

Glucose has six carbon, twelve hydrogen and six oxygen atoms. Predict the molecular formula of glucose.

Show answer

Answer

C₆H₁₂O₆

Show question

Question

The molecular formula of fructose is \(C_6H_{12}O_6\). What is its empirical formula?

Show answer

Answer

CH₂O

Show question

Question

What is water of crystallisation?

Show answer

Answer

Water of crystallisation is water molecules that are chemically bonded to molecules of the salt.

Show question

Question

What is the degree of hydration in CuSO₄.3H₂O?

Show answer

Answer

Show question

Question

An element X forms an oxide with the formula A₂O₅. What is the charge of X?

Show answer

Answer

Show question

Question

What is the ratio of C:H:O in ethanol (C₂H₅OH)?

Show answer

Answer

carbon atoms = 2

hydrogen atoms = 6

oxygen atoms = 1

ratio => 2:6:1

Show question

Question

What are two possible ways of writing the chemical formula of Ammonium nitrate?

Show answer

Answer

NH₄NO₃

Show question

Question

What is the correct name of \(CuCl_2\) ?

Show answer

Answer

Copper (I) chloride

Show question

Question

What is the charge of copper in cuprous chloride?

Show answer

Answer

Show question

Question

The molecular formula of ethane is \(C_2H_6\) , what is the empirical formula?

Show answer

Answer

\(CH_3\)

Show question

Question

Which of the following statements is incorrect about magnesium chloride?

Show answer

Answer

The molecular formula of Magnesium chloride is \(MgCl_2\)

Show question

Question

What is the chemical formula of sodium sulfide?

Show answer

Answer

\(Na_2S\)

Show question

Question

What is the anion in baking soda?

Show answer

Answer

\(HCO^{-1}_{3}\)

Show question

Question

What is the metal in table salt?

Show answer

Answer

Sodium

Show question

Question

The chemical formula of an oxide is A₂O₃ . Identify the charge on the cation.

Show answer

Answer

Show question

More about Writing Chemical Formulae

How would you like to learn this content?

Creating flashcards

Studying with content from your peer

Taking a short quiz

94% of StudySmarter users achieve better grades.

How would you like to learn this content?

Creating flashcards

Studying with content from your peer

Taking a short quiz

Free chemistry cheat sheet!

Everything you need to know on . A perfect summary so you can easily remember everything.

Email Address*

Select your language

Writing Chemical Formulae

Writing Chemical Formulae

Writing Chemical Formulae

Chemical formula definition

Types of chemical formulae

Molecular formula

Empirical formula

Displayed formula

Rules for writing chemical formulae

Steps in writing chemical formulae

Examples of writing chemical formulae: molecules, ions, and compounds

Water

Carbon tetrachloride

Copper(II) Sulphate

Ammonium nitrate

Examples of Writing Chemical Formulae

Writing Formulae - Key takeaways

References

Frequently Asked Questions about Writing Chemical Formulae

What is the meaning of writing chemical formulae?

What are some examples of chemical formulae?

What is the simple definition of chemical formula?

What are the rules for writing a chemical formula?

How do you write chemical formulas in text?

Final Writing Chemical Formulae Quiz

Writing Chemical Formulae Quiz - Teste dein Wissen

More explanations about Physical Chemistry

Discover the right content for your subjects

Biology

Business Studies

Combined Science

Computer Science

Economics

English

English Literature

Environmental Science

Geography

History

Human Geography

Law

Macroeconomics

Marketing

Math

Microeconomics

Physics

Politics

Psychology

Sociology

No need to cheat if you have everything you need to succeed! Packed into one app!

Study Plan

Quizzes

Flashcards

Notes

Study Sets

Documents

Study Analytics

Weekly Goals

Smart Reminders

Rewards

Magic Marker

Smart Formatting

Join millions of people in learning anywhere, anytime - every day

This is still free to read, it's not a paywall.

You need to register to keep reading

This is still free to read, it's not a paywall.

You need to register to keep reading

Start learning with Vaia, the only learning app you need.

StudySmarter bietet alles, was du für deinen Lernerfolg brauchst - in einer App!